Cisco 6513 Installation Guide - Page 38
Engine 32 PISA, Supervisor Engine 720, and Supervisor
View all Cisco 6513 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Catalyst 6506-E Switch Chapter 1 Catalyst 6500 Series Switch Chassis Overview Table 1-9 Catalyst 6506-E Switch Features (continued) Feature Supervisor engines Descriptions • Supports Supervisor Engine 2, Supervisor Engine 32, Supervisor Engine 32 PISA, Supervisor Engine 720, and Supervisor Engine 720-10GE. - Supervisor Engine 2 is installed in slot 1 and slot 2. - Supervisor Engine 32, Supervisor Engine 32 PISA, Supervisor Engine 720, and Supervisor Engine 720-10GE are installed in slot 5 and slot 6. - Supervisor Engine 720 and Supervisor Engine 720-10GE have built-in switching fabric. Switch Fabric Modules (WS-C6500-SFM and WS-X6500-SFM2) are not supported by Supervisor Engine 720 and Supervisor Engine 720-10GE and cannot be installed in the same chassis. - Supervisor Engine 32 and Supervisor Engine 32 PISA do not support the Switch Fabric Modules ((WS-C6500-SFM and WS-X6500-SFM2). • The uplink ports are fully functional on the redundant supervisor engine in standby mode. Note In systems with redundant supervisor engines, both supervisor engines must be the same model and have the same daughter card configurations. Each supervisor engine must have the resources to run the switch on its own, which means all supervisor engine resources are duplicated. Identical supervisor engine memory configurations are recommended, but are not required as long as the supervisor engine with the smaller memory configuration is sufficient to run the configured features of the switch. Additionally, each supervisor engine must have its own flash device and console port connections. 1-22 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-03