Cisco 6513 Installation Guide - Page 119
Table 2-29, WS-X6516-GE-TX Ethernet Module Features continued
![]() |
View all Cisco 6513 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Chapter 2 Ethernet Switching Modules 10/100 and 10/100/1000 Ethernet Modules Table 2-29 WS-X6516-GE-TX Ethernet Module Features (continued) Feature Description Chassis/slot restrictions No chassis or slot restrictions; the module can occupy any slot in any Catalyst 6500 or Catalyst 6500-E chassis. Bus connection 32-Gbps shared bus Module upgrades available PoE support Not supported. Distributed forwarding Not supported. support Pluggable transceivers support Not supported. TDR support Not supported. Module front panel LEDs STATUS • Green-All diagnostics pass; the module is operational. • Orange-The module is booting or running diagnostics. An overtemperature condition has occurred. (A minor temperature threshold has been exceeded during environmental monitoring.) • Red-The module is resetting. The switch has just been powered on or the module has been hot inserted during the normal initialization sequence. An overtemperature condition has occurred. (A major temperature threshold has been exceeded during environmental monitoring.) If the module fails to download code and configuration information successfully during the initial reset, the LED stays red; the module does not come online. LINK • Green-The port is active (the link is connected and operational). • Orange-The module or port is disabled through the CLI command or the module is initializing1. • Flashing orange-The port is faulty and has been disabled. • Off-The port is not active or the link is not connected. PHONE • Green-The PoE daughter card is installed and detected. • Off-The PoE daughter card is not detected or is not installed. 1. Verify that all LINK LEDs are functioning. OL-6265-03 Catalyst 6500 Series Ethernet Modules Installation Guide 2-45
![](/manual_guide/products/cisco-6513-installation-guide-bb98e47/119.png)