Cisco 6513 Installation Guide - Page 148
WS-X6724-SFP, WS-X6724-SFP Ethernet Module Front Panel, Table 2-46
![]() |
View all Cisco 6513 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
1-Gigabit Ethernet Modules Chapter 2 Ethernet Switching Modules WS-X6724-SFP The WS-X6724-SFP Ethernet module (Figure 2-21) provides 24 1-Gbps full- or half-duplex ports. Table 2-46 lists the module features, and Table 2-47 lists the module physical and environmental specifications. Figure 2-21 WS-X6724-SFP Ethernet Module Front Panel WS-X6724-SFP 24 PORT GIGABIT ETHERNET-SFP STATUS 99886 Table 2-46 WS-X6724-SFP Ethernet Module Features Feature Description Ports per module • 24 ports. Ports are numbered 1 (left) to 24 (right). • 2 port groups • Port ranges per port group: 1-12, 13-24 Port connector type LC (optical) or RJ-45 (copper) depending on the SFP transceiver installed. Cabling distance Depends on the SFP transceiver installed in the module port. Refer to Appendix B for descriptions of the SFP transceiver types and supported cabling distances. Buffer size • Rx-166 kB per port • Tx-1.17 MB per port QoS • Number of egress queues: 4 • Number of ingress queues: 1 (2 if DFC3x daughter card is present.) • Number of thresholds per egress queue: 1 or 2 • Number of thresholds per ingress queue: 8 Maximum frame size Up to 9216 bytes per frame Module oversubscription rate 1.2:1 Supervisor engine support Supervisor Engine 720 Supervisor Engine 720-10GE Software support • With Supervisor Engine 720-12.2(17a)SX • With Supervisor Engine 720 and DFC3C or DFC3CXL-12.2(33)SXH • With Supervisor Engine 720-10GE-12.2(33)SXH 2-74 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-03
![](/manual_guide/products/cisco-6513-installation-guide-bb98e47/148.png)