Cisco 6513 Installation Guide - Page 52
Feature, Table 1-15, Catalyst 6509-NEB Switch Features
![]() |
View all Cisco 6513 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Catalyst 6509-NEB Switch Chapter 1 Catalyst 6500 Series Switch Chassis Overview Table 1-15 Catalyst 6509-NEB Switch Features Feature Chassis Power supplies Features Nine vertical slots. Slots are numbered from 1 (right) to 9 (left). • Supports one or two power supplies. The following power supplies are supported: - WS-CAC-2500W (2500 W AC-input power supply) - WS-CDC-2500W (2500 W DC-input power supply) - WS-CAC-3000W (3000 W AC-input power supply) - WS-CAC-4000W-US (4000 W AC-input power supply) - WS-CAC-4000W-INT (4000 W AC-input power supply) - PWR-4000-DC (4000 W DC-input power supply) - WS-CAC-6000W (6000 W AC-input power supply) - WS-CAC-8700W-E (8700 W AC-input power supply) Note The 6000 W and the 8700 W AC-input power supplies are limited to 4500 W maximum output when installed in the Catalyst 6509-NEB chassis. Note For information and specifications for each of the supported power supplies, refer to Appendix A, "Power Supply Specifications," in the Catalyst 6500 Series Switches Installation Guide. • Installed power supplies can be of different wattage ratings. Installed power supplies can also be both AC-input, both DC-input, or one AC-input and one DC-input. Power supplies can be configured in either redundant or nonredundant mode. • All Catalyst 6500 series AC-input power supplies require single-phase source AC. Source AC can be out of phase between multiple power supplies or multiple AC-power plugs on the same power supply because all AC power supply inputs are isolated. • Single power supplies are installed in the left power supply bay. The second power supply is installed in the right power supply bay. 1-36 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-03
![](/manual_guide/products/cisco-6513-installation-guide-bb98e47/52.png)