Cisco 6513 Installation Guide - Page 66
WS-CAC-4000W-US 4000 W AC-input power supply
View all Cisco 6513 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Catalyst 6513 Switch Chapter 1 Catalyst 6500 Series Switch Chassis Overview Table 1-21 Catalyst 6513 Switch Features Feature Chassis Power supplies Description Thirteen horizontal slots. Slots are numbered from (1) top to (13) bottom. • Supports one or two power supplies. The following power supplies are supported: - WS-CAC-2500W (2500 W AC-input power supply) - WS-CDC-2500W (2500 W DC-input power supply) - WS-CAC-3000W (3000 W AC-input power supply) - WS-CAC-4000W-US (4000 W AC-input power supply) - WS-CAC-4000W-INT (4000 W AC-input power supply) - PWR-4000-DC (4000 W DC-input power supply) - WS-CAC-6000W (6000 W AC-input power supply) - WS-CAC-8700W-E (8700 W AC-input power supply) Note For information and specifications for each of the supported power supplies, refer to Appendix A, "Power Supply Specifications," in the Catalyst 6500 Series Switches Installation Guide. • The 8700 W AC-input power supply is limited to 6000 W when it is installed in a Catalyst 6513 switch chassis. • Installed power supplies can be of different ratings. Installed power supplies can also be both AC-input, both DC-input, or one AC-input and one DC-input. Power supplies can be configured in either redundant or nonredundant mode. • All Catalyst 6500 series AC-input power supplies require single-phase source AC. Source AC can be out of phase between multiple power supplies or multiple AC-power plugs on the same power supply because all AC power supply inputs are isolated. • You must install a 2500 W or higher capacity power supply when using the Supervisor Engine 32 or the Supervisor Engine 720 and the high-speed fan tray. 1-50 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-03