Cisco IE-3000-8TC Installation Guide - Page 102
B-4, Pushing the Module Latches Up, Connecting the Switch and the Module
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Adding Modules to the Switch Appendix B Installation In a Hazardous Environment Step 3 Push up the upper module latches (at the top of the switch and the module). See Figure B-4. Push down the lower module latches (at the bottom of the switch and the module). Figure B-4 Pushing the Module Latches Up 201824 Step 4 Align the connectors on the switch and the module, and slide the switch and the module together to make the connection. See Figure B-5. Figure B-5 Connecting the Switch and the Module 201825 Step 5 Push the upper module latches down and the lower latches up. See Figure B-6. B-12 Cisco IE 3000 Switch Hardware Installation Guide OL-13017-01
B-12
Cisco IE 3000 Switch Hardware Installation Guide
OL-13017-01
Appendix B
Installation In a Hazardous Environment
Adding Modules to the Switch
Step 3
Push up the upper module latches (at the top of the switch and the module). See
Figure B-4
. Push down
the lower module latches (at the bottom of the switch and the module).
Figure B-4
Pushing the Module Latches Up
Step 4
Align the connectors on the switch and the module, and slide the switch and the module together to make
the connection. See
Figure B-5
.
Figure B-5
Connecting the Switch and the Module
Step 5
Push the upper module latches down and the lower latches up. See
Figure B-6
.
201824
201825