Cisco IE-3000-8TC Installation Guide - Page 106
Connecting the Protective Ground and DC Power, Attach the Power and Relay Connector to the Switch
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Verifying Switch Operation Appendix B Installation In a Hazardous Environment Figure B-8 Connecting to the Console Port 201868 Step 4 Step 5 Step 6 Attach the appropriate adapter to the terminal, if needed. Connect the other end of the adapter cable to the PC or terminal adapter. Start the terminal-emulation software on the PC. Connecting the Protective Ground and DC Power These sections describe the steps required to connect a protective ground and DC power to the switch: • Grounding the Switch, page B-17 • Wiring the DC Power Source, page B-19 • Attach the Power and Relay Connector to the Switch, page B-24 Note The Cisco IE 3000 switch can be used with an optional AC/DC power converter (PWR-IE3000-AC). For instructions on how to connect the power converter to the switch, see the "Connecting the Switch to the Power Converter" section on page B-49. Locate the power and relay connector in the switch accessory kit. Note You can get replacement power and relay connectors (PWR-IE3000-CNCT=) by calling Cisco Technical Support. See the "Obtaining Documentation, Obtaining Support, and Security Guidelines" section on page x. B-16 Cisco IE 3000 Switch Hardware Installation Guide OL-13017-01