Cisco IE-3000-8TC Installation Guide - Page 94
replacing the unit., Explosion Hazard-The area must be known to be nonhazardous before installing
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Preparing for Installation Appendix B Installation In a Hazardous Environment Warning This equipment is intended for use in a Pollution Degree 2 industrial environment, in overvoltage Category II applications (as defined in IEC publication 60664-1), and at altitudes up to 2000 meters without derating. Statement 1068 Warning Explosion Hazard-Do not connect or disconnect wiring while the field-side power is on; an electrical arc can occur. This could cause an explosion in hazardous location installations. Be sure that power is removed or that the area is nonhazardous before proceeding. Statement 1081 Warning Explosion Hazard-The area must be known to be nonhazardous before installing, servicing, or replacing the unit. Statement 1082 Warning Exposure to some chemicals could degrade the sealing properties of materials used in the sealed relay device. Statement 381 Warning Explosion Hazard-Substitution of components may impair suitability for Class I, Division 2/Zone 2. Statement 1083 Caution This equipment is only suitable for use in Class I, Division 2, Groups A, B, C, D, or nonhazardous locations. Cisco IE 3000 Switch Hardware Installation Guide B-4 OL-13017-01