Cisco IE-3000-8TC Installation Guide - Page 44
Inserting Wires in the Power and Relay Connector, Step 6, Caution
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Verifying Switch Operation Chapter 2 Switch Installation Figure 2-14 Inserting Wires in the Power and Relay Connector 1 2 V RT A A 202028 1 Power source positive connection 2 Power source return connection Step 6 Use a ratcheting torque flathead screwdriver to torque the power and relay connector captive screws (above the installed wire leads) to 2 in-lb. See Figure 2-15. Caution Do not over-torque the power and relay connector captive screws. The torque should not exceed 2 in-lb. 2-18 Cisco IE 3000 Switch Hardware Installation Guide OL-13017-01
2-18
Cisco IE 3000 Switch Hardware Installation Guide
OL-13017-01
Chapter 2
Switch Installation
Verifying Switch Operation
Figure 2-14
Inserting Wires in the Power and Relay Connector
Step 6
Use a ratcheting torque flathead screwdriver to torque the power and relay connector captive screws
(above the installed wire leads) to 2 in-lb. See
Figure 2-15
.
Caution
Do not over-torque the power and relay connector captive screws. The torque should not exceed 2 in-lb.
1
Power source positive connection
2
Power source return connection
202028
RT
A
V
A
1
2