Cisco IE-3000-8TC Installation Guide - Page 117
Installing the Switch on a DIN Rail, B-18, Cisco IE 3000 Switch Rear Panel
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Appendix B Installation In a Hazardous Environment Installing the Switch Installing the Switch on a DIN Rail The switch ships with latches on the rear panel for a mounting on a DIN rail. See Figure B-18. Figure B-18 Cisco IE 3000 Switch Rear Panel 203976 You can install the switch as a standalone device on the DIN rail or with the expansion modules already connected. You must connect the expansion modules to the switch before installing the switch on the DIN rail. To connect the modules to the switch, follow the steps described in the "Adding Modules to the Switch" section on page B-8. The illustrations in this procedure show how to install the switch as a standalone device. The same steps can be used to install a switch with expansion modules on the DIN rail. OL-13017-01 Cisco IE 3000 Switch Hardware Installation Guide B-27