Cisco IE-3000-8TC Installation Guide - Page 21
Dual-Purpose Port LEDs, Compact Flash Memory Card - ethernet switch
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 1 Overview Compact Flash Memory Card Dual-Purpose Port LEDs Figure 1-9 shows the LEDs on a dual-purpose port. You can configure each port as either a 10/100/1000 port through the RJ-45 connector or as an SFP module, but not both at the same time. The LEDs show how the port is being used (Ethernet or SFP module). The LED colors have the same meanings as described in Table 1-6. Figure 1-9 Dual-Purpose Port LEDs 1 234 1 203660 1 RJ-45 connector 3 SFP module port in-use LED 2 RJ-45 port in-use LED 4 SFP module slot Compact Flash Memory Card The switch supports a compact flash memory card that makes it possible to replace a failed switch without reconfiguring the new switch. The slot for the compact flash memory card is on the bottom of the switch. See Figure 1-10. Note For more information on inserting and removing the compact flash memory card, see the "Installing or Removing the Compact Flash Memory Card" section on page 2-10. OL-13017-01 Cisco IE 3000 Switch Hardware Installation Guide 1-11