D-Link DFL-300 User Manual - Page 24
DMZ Interface, WebUI, IP Address, NetMask
UPC - 790069240751
View all D-Link DFL-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
server. Ping: Select this to allow the external network to ping the IP Address of the Firewall. This will allow people from the Internet to be able to ping the Firewall. If set to enable, the FIREWALL VPN ROUTER will respond to echo request packets from the external network. WebUI: Select this to allow the FIREWALL VPN ROUTER WEBUI to be accessed from the External (WAN) network. This will allow the WebUI to be configured from a user on the Internet. Keep in mind that the FIREWALL VPN ROUTER always requires a username and password to enter the WebUI. DMZ Interface The Administrator uses the DMZ Interface to set up the DMZ network. The DMZ network consists of server computers such as FTP, SMTP, and HTTP (web). These server computers are put in the DMZ network so they can be isolated from the Internal (LAN) network traffic. Broadcast messages from the Internal network will not cross over to the DMZ network to cause congestions and slow down these servers. This allows the server computers to work efficiently without any slowdowns. IP Address: The private IP address of the Firewall's DMZ interface. This will be the IP address of the DMZ port. The IP address the Administrator chooses will be a private IP address and cannot use the same network as the External or Internal network. NetMask: This will be the netmask of the DMZ network. - 24 -