D-Link DFL-300 User Manual - Page 91
Action, Logging, Enable, Statistics, Alarm, Step 3, Cancel, An alarm will
UPC - 790069240751
View all D-Link DFL-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Action: Select Permit or Deny from the drop down list to allow or reject the packets travelling between the source network and the destination network. Logging: Select Enable to enable flow monitoring. Statistics: Select Enable to enable flow statistics. Alarm Threshold: set a maximum flow rate (in Kbytes/Sec). An alarm will be sent if flow rates are higher than the specified value. Step 3: Click OK to add a new outgoing policy; or click Cancel to cancel adding a new outgoing policy. - 91 -
- 91 -
Action:
Select Permit or Deny from the drop down list to allow or reject the
packets travelling between the source network and the destination network.
Logging:
Select
Enable
to enable flow monitoring.
Statistics:
Select
Enable
to enable flow statistics.
Alarm
Threshold: set a maximum flow rate (in Kbytes/Sec).
An alarm will be
sent if flow rates are higher than the specified value.
Step 3:
Click
OK
to add a new outgoing policy; or click
Cancel
to cancel
adding a new outgoing policy.