Dell External OEMR 1435 User Guide - Page 134
The smallest unit of information interpreted by your system.
View all Dell External OEMR 1435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
autoexec.bat file The autoexec.bat file is executed when you boot your system (after executing any commands in the config.sys file). This start-up file contains commands that define the characteristics of each device connected to your system, and it finds and executes programs stored in locations other than the active directory. backup A copy of a program or data file. As a precaution, you should back up your system's hard drive on a regular basis. Before making a change to the configuration of your system, you should back up important start-up files from your operating system. baud rate A measurement of data transmission speed. For example, modems are designed to transmit data at one or more specified baud rate(s) through the COM (serial) port of a system. binary A base-2 numbering system that uses 0 and 1 to represent information. The system performs operations based on the ordering and calculation of these numbers. BIOS Acronym for basic input/output system. Your system's BIOS contains programs stored on a flash memory chip. The BIOS controls the following: • Communications between the microprocessor and peripheral devices, such as the keyboard and the video adapter • Miscellaneous functions, such as system messages bit The smallest unit of information interpreted by your system. BMC Abbreviation for baseboard management controller, which is a controller that provides the intelligence in the IPMI structure. boot routine When you start your system, it clears all memory, initializes devices, and loads the operating system. Unless the operating system fails to respond, you can reboot (also called warm boot) your system by pressing ; otherwise, you must perform a cold boot by pressing the reset button or by turning the system off and then back on. 134 Glossary