Dell External OEMR 1435 User Guide - Page 35
Enter the Current DNS RAC Name using 1-32 alpha, You may enter the Current DNS RAC Name.
View all Dell External OEMR 1435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Table 2-1. Remote Access Configuration Utility (continued) Option Description DNS Server 2 This field is read-only when DNS Servers from DHCP is set to on. Enter the IP Address of DNS Server 2 The following IPv4 rules apply: • IP addresses cannot be 127.xxx.xxx.xxx, where xxx is between 0-255. • The first octet must be between 1-223 (i.e. 143.xxx.xxx.xxx) • The last octet must not be 0 or 255 (i.e. xxx.xxx.xxx.0 or xxx.xxx.xxx.255) Register RAC Name on = You may enter the Current DNS RAC Name. Register RAC Name This field is read-only when Register RAC Name is set to off. Enter the Current DNS RAC Name using 1-32 alphanumerics, spaces, and symbols. Press to save the value. Press to exit the field without saving. Domain Name from DHCP Turns the domain name on or off. Domain Name This field is read-only when DNS Servers from DHCP is set to on. Enter the Domain Name using 1-64 alpha-numerics, spaces, and symbols. Press to save the value. Press to exit the field without saving. Virtual Media Configuration NOTE: This option is available only on systems with a DRAC installed. Virtual Media Attaches or detaches a virtual media drive. Virtual Flash Enables or disables virtual flash memory. LAN User Configuration Enables setting the user name, user password, user privilege, and enables user access for user ID=2. Account Access Enables or disables account privileges. Account Privilege Sets the account to: Admin, User, Operator, or No Access Account User Name Sets the account user name. Configuring Your Managed System 35