Dell External OEMR 1435 User Guide - Page 64
IPMI Shell Commands, seconds
View all Dell External OEMR 1435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
IPMI Shell Commands Table 3-1 lists IPMI Shell commands with a brief description. NOTE: The sol, sensor, and connect commands can be used in the IPMI Shell interactive and non-interactive modes and the quit command can be used only in the interactive mode. Table 3-1. IPMI Shell Commands Command identify sysinfo power sel sol sensor lcd powermonitor connect help quit Description Controls the identification LED on the front panel. Retrieves and displays managed system information. Controls the power state of the managed system. Displays or deletes information from the SEL. Enables Serial-over-LAN for the remote managed system. Displays current status of platform sensors. Displays information on and helps configure the LCD panel in Dell x9xx and xx0x systems. Displays information on and helps manage your system's power. Connects to the BMC of the remote managed system. displays a command list with descriptions and syntax of options. exits the command prompt. identify Synopsis identify [on [-t seconds] | off] Description This command controls the identification LED on the front panel. See Figure 3-6. 64 Using the BMC Management Utility