Dell Force10 E1200i Installing and Maintaining the E1200i System - Page 37
Connecting the Ground Cable to the E1200 PEM, DC PEM with Connections in Place
View all Dell Force10 E1200i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Step Task (continued) 7 Route the terminated cables down and toward the rack rail, as shown below. Figure 8-5. Connecting the Ground Cable to the E1200 PEM Lug Split-lock washer Lug nuts Ground studs fn00106lp Figure 8-6. DC PEM with Connections in Place -48 (-) cable typically black Ground cable typically green Return cable (+) typically red fn00106lp Installing DC Power Supplies | 37
Installing DC Power Supplies
|
37
7
Route the terminated cables down and toward the rack rail, as shown below.
Figure 8-5.
Connecting the Ground Cable to the E1200 PEM
Figure 8-6.
DC PEM with Connections in Place
Step
Task
(continued)
Split-lock washer
Ground studs
Lug nuts
Lug
fn00106lp
fn00106lp
-48 (-) cable
typically black
Return cable (+)
typically red
Ground cable
typically green