Dell Force10 E1200i Installing and Maintaining the E1200i System - Page 74
FTOS Command Line Interface Reference, Refer to the, for CLI configuration procedures
View all Dell Force10 E1200i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
www.dell.com | support.dell.com Step Command Task (continued) BOOT_USER # show default-gateway No gateway IP address specified! BOOT_USER # default-gateway ip 1.2.3.5 Gateway IP address 1.2.3.5 9 dir flash: dir slot0: Use the dir flash: command to list files stored on the internal flash device. Use the dir slot0: command to list files stored on the external flash device. BOOT_USER # dir flash: Displaying files in flash: size date time -------- ------ ------ 11187685 FEB-15-2002 05:37:58 11031398 FEB-23-2002 22:42:46 name -------e1200-.bin E1200-3.bin 10 reload 11 Force10> Reload software. The autoboot program initializes and displays self-test results on the console screen. NOTE: Do not press break control sequence at any time during the boot/reboot process. Doing so causes the boot process to terminate. When the reboot completes, the CLI defaults to the EXEC mode. Refer to the FTOS Command Line Interface Reference for CLI configuration procedures and configuration instructions. 74 | System Boot