Dell Force10 E1200i Installing and Maintaining the E1200i System - Page 72
boot change {primary, secondary | default}, boot change, primary, secondary, default, ENTER
View all Dell Force10 E1200i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
www.dell.com | support.dell.com Step 5 Command boot change {primary | secondary | default} Task (continued) If your configuration displays no preconfigured operating system boot parameters, use the boot change command to edit appropriate fields. • The primary operating system boot parameters are used in the first attempt to boot the system. • The secondary operating system boot parameters are used if the primary operating system boot selection is not available. • The default operating system boot parameters are used if the secondary operating system boot parameter selection is not available. The default parameters always reside on the internal flash device (flash:). NOTE: These parameters, as well as other boot parameters, can be modified in the CLI mode. When you enter the boot change command, you are prompted for a response. • Enter a new parameter or press the ENTER key (carriage return) to accept the default parameter. • Enter . (period) to clear a field. • Enter - (dash) to edit a field above the current cursor position. NOTE: When you enter a new parameter that extends beyond 80 characters, you cannot use the BACKSPACE key to correct any mistakes. If you make a mistake, you must re-enter the parameter. BOOT_USER # boot change primary '.' = clear field; '-' = go to previous field boot device file name : flash : /E1200-3.x.bin BOOT_USER # boot change default 72 | System Boot