Dell Force10 E1200i Installing and Maintaining the E1200i System - Page 50
Cable and Adapter Pin Assignments, Pinout for an RJ-45 Connector End Adaptors
View all Dell Force10 E1200i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
www.dell.com | support.dell.com • 8 data bits • 1 stop bit • Window Terminal Emulator option set to NO • 24 lines X 80 characters • No flow control (console port only) • Hardware flow control (RTS/CTS) (for auxiliary port only) Cable and Adapter Pin Assignments Use the E1200 Console port on the RPM to connect to a terminal port, PC serial port, or a terminal server to configure and monitor your system. Use the E1200 Auxiliary port on the RPM to connect to a modem. Both the Console and Auxiliary port are RJ-45 ports. Figure 10-1 displays the pinouts in an RJ-45 port. Figure 10-1. Pinout for an RJ-45 Connector End Adaptors 87654321 Table 10-1 displays the RJ-45 console port pin assignments. Table 10-2 displays the RJ-45 auxiliary port pin assignments. Table 10-1. Console Port (RJ-45) Pin Assignments Pin Signal 1 NC (unused) 2 DTR 3 TxD 4 GND 5 GND 6 RxD 7 DSR 8 NC (unused) Input/Output Output Output Input Input - Table 10-2. Auxiliary Port (RJ-45) Pin Assignments Pin Signal 1 RTS 2 DTR 3 TxD 4 GND Input/Output Output Output Output - 50 | RPM Ports and Cables