Dell OpenManage Network Manager Web Client Guide 5.2 - Page 101

Event Name- The event associated with the alarm. Tip If you hover the cursor over a row in the portlet display, a tooltip appears with information about the alarm. This can include the alarm's Date Opened, the Entity Name, any alarm Message, Event Name, Alarm and Entity Type, its status as Service Effecting, Notification OID, Equipment, Severity, whether the alarm was Suppressed, or Acknowledged and the Device IP. If an alarm is Service Effecting, (reflect an impact on a service) it can propagate to appear as components of service- and link-related alarms. Service-effecting alarms are of indeterminate or greater severity. See Alarms in Visualizations / Topologies on page 219 for a description of how alarms appear in the topology portlet. The next section (Expanded Alarm Portlet) describes alarm actions and additional alarm capabilities. Configuring the Alarms Chart Turn the chart on or off in the Settings screen's Chart Options panel. If no data exists for the chart and the Chart option is on, the portlet returns to "no-chart" mode. When you enable the chart Filtering is disabled since the chart, in effect, provides the filter. When the chart is disabled then filtering options are available. Settings are saved if you have Admin rights or the Portlet is on your Public / Private pages (like standard behavior). NOTE: Changes appear after you click Apply. The Filter panel disappears when you check the Show Chart checkbox. Alarms | Key Portlets 101