Dell PowerEdge R310 Hardware Owner's Manual - Page 103
Integrated Storage Controller Card - raid configuration
View all Dell PowerEdge R310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Integrated Storage Controller Card Your system includes a dedicated expansion-card slot on the riser for an integrated SAS or PERC controller card that provides the integrated storage subsystem for your system's internal hard drives. The controller supports SAS and SATA hard drives and also enables you to set up the hard drives in RAID configurations as supported by the version of the storage controller included with your system. Removing the Integrated Storage Controller Card CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2 Open the system. See "Opening the System" on page 78. 3 If installed, remove the expansion card. See "Removing an Expansion Card" on page 96. 4 Remove the second expansion-card riser. See "Removing an Expansion-Card Riser" on page 97. 5 Press down on the card retention tab (marked with a blue dot) and pull the blue release tab. 6 Remove the card from the storage controller card slot. See Figure 3-14. Installing System Components 103