Dell PowerEdge R310 Hardware Owner's Manual - Page 97
Expansion-Card Riser, Removing an Expansion-Card Riser
View all Dell PowerEdge R310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Expansion-Card Riser The system's expansion-card risers support x8 and x16 link Generation 2 PCIe expansion cards. Removing an Expansion-Card Riser CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2 Open the system. See "Opening the System" on page 78. 3 If installed, remove the expansion card from the expansion-card slot. See "Removing an Expansion Card" on page 96. 4 To remove the expansion-card riser, press the release tab and lift the expansion-card riser from the connector on the chassis. See Figure 3-11. Installing System Components 97