Dell PowerEdge R310 Hardware Owner's Manual - Page 131
properly. See Entering the System Setup Program
View all Dell PowerEdge R310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Figure 3-23. Replacing the System Battery 1 3 2 1 positive side of battery connector 3 system battery 2 negative side of battery connector 3 Locate the battery socket. See Figure 6-1. CAUTION: To avoid damage to the battery connector, you must firmly support the connector while installing or removing a battery. 4 To remove the battery, push the metal tab away from the battery until the battery pops out. See Figure 3-23. 5 To install the new system battery, hold the battery with the "+" facing up, and aligned to the metal tab on the socket. 6 Press the battery straight down into the socket until it snaps into place. 7 Close the system. See "Closing the System" on page 79. 8 Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals. 9 Enter the System Setup program to confirm that the battery is operating properly. See "Entering the System Setup Program" on page 54. Installing System Components 131