Dell PowerEdge R310 Hardware Owner's Manual - Page 91
Removing a Hard Drive From a Hard-Drive Bracket
View all Dell PowerEdge R310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Removing a Hard Drive From a Hard-Drive Bracket Remove the screws from the slide rails on the hard-drive bracket and separate the hard drive from the bracket. See Figure 3-9. Figure 3-9. Removing and Installing a Hard Drive From a Hard-Drive Bracket 1 2 3 4 1 screws (4)* 3 SAS/SATA screw holes (4) 2 hard drive 4 hard-drive bracket *Screws are supplied along with the hard drives ordered from Dell. Installing a Hard Drive Into a Hard-Drive Bracket 1 Insert the hard drive into the hard-drive bracket with the connector end of the drive at the back. See Figure 3-9. 2 Align the screw holes on the hard drive with the back set of holes on the hard-drive bracket. When aligned correctly, the back of the hard drive will be flush with the back of the hard-drive bracket. 3 Attach the four screws to secure the hard drive to the hard-drive bracket. Installing System Components 91