Dell PowerEdge R310 Hardware Owner's Manual - Page 105
Installing the Integrated Storage Controller Card
View all Dell PowerEdge R310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Installing the Integrated Storage Controller Card CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2 Open the system. See "Opening the System" on page 78. 3 If installed, remove the expansion card. See "Removing an Expansion Card" on page 96. 4 To install the integrated storage controller card: a Hold the card by its edges. b Align the card with the alignment guides. c Insert the card-edge connector firmly into the connector until the card is fully seated. 5 Close the system. See "Opening and Closing the System" on page 78. 6 Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals. Installing System Components 105