Dell PowerEdge R920 Dell PowerEdge R920 System Owners Manual - Page 134
load-reduced Error Correcting Code ECC DIMMs, Up to 6 TB
View all Dell PowerEdge R920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Expansion Bus Riser 3 (optional) Memory Architecture Memory module sockets Memory module capacities LRDIMMs RDIMMs Minimum RAM Maximum RAM LRDIMMs and RDIMMs Drives Hard drives Four hard-drive systems Twenty four hard-drive systems (SAS/ SATA) (Slot 2/2) One full-height, half-length x4 link (Slot 3) One full-height, half-length x8 link (Slot 4) One full-height, full-length x16 link NOTE: To use slots 6 through 10, all four processors must be installed. (Slot 5) One full-height, half-length x16 link (Slot 6) One full-height, half-length x16 link (Slot 7) One full-height, half-length x16 link (Slot 8) One full-height, half-length x16 link (Slot 1/ 9) One full-height, full-length x8 link (Slot 2/ 10) One full-height, half-length x8 link 1066 MT/s, 1333 MT/s or 1600 MT/s DDR3 registered, load-reduced Error Correcting Code (ECC) DIMMs Support for advanced ECC or memory optimized operation Ninety-six 240-pin 32 GB quad-ranked 4 GB, 8 GB, or 32 GB single-, dual-, quad-, or octal-ranked 4 GB with a single processor Up to 6 TB Up to four 2.5 inch, internal, hot-swappable SAS hard drives in hard-drive slots 0 through 3. This configuration supports: • 3Gb/s, 6Gb/s, and 12Gb/s I/O operations on SAS drives. • 3Gb/s and 6Gb/s on SATA drives. Up to twenty four 2.5 inch, internal, hot-swappable SAS/SATA hard-drives. This configuration supports: • 3Gb/s, 6Gb/s, and 12Gb/s I/O operations on SAS drives. 134