Dell PowerEdge R920 Dell PowerEdge R920 System Owners Manual - Page 51
Installing a Memory Riser, Ejecting The Memory Module
View all Dell PowerEdge R920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
6. To release the memory-module blank from the socket, simultaneously press the ejectors on both ends of the memory module socket. CAUTION: Handle each memory module only by the card edges, making sure not to touch the middle of the memory module or metallic contacts. To avoid damaging the memory module, handle only one memory module at a time. Figure 18. Ejecting The Memory Module 1. memory module 3. memory-module socket 2. memory-module socket ejectors (2) 7. If a memory module or a memory-module blank is installed in the socket, remove it. NOTE: Retain the removed memory-module blank(s) for future use. Figure 19. Removing The Memory Module 1. memory module/memory-module blank 8. Install memory-module blanks in vacant memory-module socket(s) to ensure proper system cooling.. 9. Close the memory riser cover. 10. Install the memory risers. See Installing a Memory Riser. 11. Close the system. 12. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals. 51