Dell PowerEdge R920 Dell PowerEdge R920 System Owners Manual - Page 33
Installing System Components, Recommended Tools, Front Bezel (Optional), Removing The Front Bezel
View all Dell PowerEdge R920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
3 Installing System Components Recommended Tools You may need the following items to perform the procedures in this section: • Key to the system keylock • #2 Phillips screwdriver • 10 in-lb. torque tool • Wrist grounding strap connected to ground You may need the following tools for assembling cables for a DC power supply unit (PSU), when available: • AMP 90871-1 hand-crimping tool or equivalent • Wire-stripper pliers capable of removing insulation from size 10 AWG solid or stranded, insulated copper wire NOTE: Use alpha wire part number 3080 or equivalent (65/30 stranding). Front Bezel (Optional) Removing The Front Bezel 1. Unlock the keylock at the left end of the bezel. 2. Lift the release latch adjacent to the keylock. 3. Rotate the left end of the bezel away from the front panel. 4. Unhook the right end of the bezel and pull the bezel away from the system. 33