Dell PowerVault 56F Dell PowerVault 56F 16-Port Fibre Channel Switch Inst - Page 138
Telnet, uPathShow, <domain>, uPathAllShow
![]() |
View all Dell PowerVault 56F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
To display error messages by way of Telnet: 1. From the prompt, type errShow. 2. To scroll through the error list, type 3. Scroll through the error log (if no errors were encountered, the message appears). Table A-1 shows the error messages organized by module. Flood FSPF INVLSR (3) LSRLEN (2) BADSRC (3) An unknown Link State Record has been received from a neighbor switch. The local switch is trying to create a Link State Update that exceeds the maximum length. The neighbor switch domain ID has changed, without the link going down. Check that all paths and routing tables are correct using the commands uPathShow , or uPathAllShow. If the paths are not correct reboot the neighbor switch that sent the wrong data. Check the paths and routes again. If they are still incorrect, reboot the local switch. Check that all paths and routing tables are correct. If they are not, reboot the local switch. The system automatically recovers. A-2 Installation and Troubleshooting Guide
![](/manual_guide/products/dell-powervault-50f-dell-powervault-56f-16port-fibre-channel-switch-installation-troubleshooting-guide-a7ab90c/138.png)