Dell PowerVault 56F Dell PowerVault 56F 16-Port Fibre Channel Switch Inst - Page 59
agtcfgDefault, sysDescr, sysLocation, sysContact, swEventTra, pLevel, swEventTrap
View all Dell PowerVault 56F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Table 4-2 describes the fields for the agtcfgDefault command. sysDescr sysLocation sysContact swEventTrapLevel The system description (in MIB-II definition). The default value is set as Fibre Channel Switch. The location of the system (switch) (in MIB-II). The default value is set as End User Premise. The contact information for this system (switch). The default value is set as Field Support. The event trap level in conjunction with an event's severity level. When an event occurs and if its severity level is at or below the set value, the SNMP trap, swEventTrap, is sent to configured trap recipients. By default, this value is set at 0, implying that no swEventTrap is sent. Other possible values are: 0 = None 1 = Critical 2 = Error 3 = Warning 4 = Informational 5 = Debug See "errShow" found later in this chapter for related information. support.dell.com PowerVault 56F 16-Port Fibre Channel Switch Commands 4-3