Dell PowerVault 56F Dell PowerVault 56F 16-Port Fibre Channel Switch Inst - Page 153

DIAG-INTNOTCLR [centralMemoryTest] DIAG-LCMEM [centralMemoryTest, cmemRetentionTest] DIAG-LCMEMTX [centralMemoryTest] DIAG-LCMRS [centralMemoryTest, cmemRetentionTest] DIAG-LCMTO [centralMemoryTest, cmemRetentionTest] DIAG-MEMNULL [ramTest] DIAG-MEMSZ [ramTest] DIAG-MEMORY [ramTest] DIAG-PORTABSENT [portLoopbackTest, crossPortTest, spinSilk] DIAG-PORTDIED [portLoopbackTest, crossPortTest, spinSilk] DIAG-PORTSTOPPED [spinSilk] DIAG-PORTWRONG [crossPortTest] The interrupt bit could not be cleared Data read from the Central Memory location did not match data previously written into the same location Central Memory transmit path failure: ASIC 1 failed to read ASIC 2 via the transmit path Central Memory Read Short: M bytes requested but got less than M bytes Central Memory Timeout: Data transfer initiated did not complete within the timeout period Test failed to malloc Memory size to be tested is less than or equal to zero Data read from RAM location did not match previously written data into same location Port is not present Port was in loopback mode and then went inactive Port is no longer transmitting as indicated by the Number of Frames Transmitted counter being stuck at N frames Frame erroneously received by port M instead of the intended port N ASIC failure ASIC failure Mainboard failure ASIC failure ASIC failure Mainboard failure Mainboard failure CPU RAM failure ASIC or mainboard frame ASIC, GBIC module or fiber cable failure ASIC, GBIC module or fiber cable failure ASIC failure Replace mainboard assembly Replace mainboard assembly Replace mainboard assembly Replace mainboard assembly Replace mainboard assembly Replace mainboard assembly Replace mainboard assembly Replace mainboard assembly or DRAM module Replace mainboard assembly Replace mainboard assembly, GBIC module or fiber cable Replace mainboard assembly, GBIC module or fiber cable Replace mainboard assembly support.dell.com Error Messages A-17