Dell PowerVault 56F Dell PowerVault 56F 16-Port Fibre Channel Switch Inst - Page 81

enc in crc err too shrt too long bad eof enc out disc c3 link fail loss sync loss sig frjt fbsy Encoding errors inside of frames Frames with cyclic redundancy check (CRC) errors Frames shorter than minimum Frames longer than maximum Frames with bad end-of-frame delimiters Encoding error outside of frames Class 3 frames discarded Link failures (LF1 or LF2 states) Loss of synchronization Loss of signal Frames rejected with F_RJT Frames busied with F_BSY The portLogClear command clears the data from the port log. The command syntax is portLogClear. The portLogDump command prints the port log without page breaks. The command syntax is portLogDump. The portStatsShow command, when used with a port number, gives a static view of the port status when the switch executed the command. For example, to update the command and check if an error count is increasing, reissue the portStatsShow command to capture another snapshot. Fields for the portStatsShow command are described in Table 4-15. The command syntax is portStatsShow . support.dell.com PowerVault 56F 16-Port Fibre Channel Switch Commands 4-25