Dell PowerVault MD3000i Command Line Interface Guide - Page 114
Commands Listed Alphabetically, Accept Storage Array Pending Topology, Activate Storage Array Firmware
View all Dell PowerVault MD3000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Commands Listed Alphabetically Following are the script commands listed alphabetically. Accept Storage Array Pending Topology This command configures all or part of the pending host topology discovered by the show storageArray pendingTopology command. Syntax accept storageArray pendingTopology (allHosts | host "hostName" | hosts ("hostName1" ... "hostNamen") Parameters Parameter Description allHosts Selects all hosts identified by show storageArray pendingTopology. host or hosts Name of the host to include in the storage array topology. You can enter more than one host name. You must put quotation marks (" ") around the host name. Activate Storage Array Firmware This command activates firmware previously downloaded to the pending configuration area in the RAID controller modules in the storage array. Syntax activate storageArray firmware Parameters None Autoconfigure Storage Array This command automatically configures a storage array. Before entering the autoConfigure storageArray command, enter the show storageArray autoConfiguration command. The show storageArray autoConfiguration command returns configuration information in the form of a list of valid 114 Script Commands