Dell PowerVault MD3000i Command Line Interface Guide - Page 179
Set Session, storageArrayPassword, intervalValue, iterationValue
View all Dell PowerVault MD3000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
Parameters Parameter physicalDisk Description Identifies the enclosure and slot where the physical disk resides. Enclosure ID values are 0 to 99. Slot ID values are 0 to 31. You must put brackets ([ ]) around the enclosure ID value and the slot ID value. Set Session This command defines how you want the current script engine session to run. Syntax set session errorAction=(stop | continue) password="storageArrayPassword" performanceMonitorInterval=intervalValue performanceMonitorIterations=iterationValue Parameters Parameter errorAction password Description Specifies how the session responds if an error is encountered during processing. You can choose to stop the session if an error is encountered, or you can continue after encountering an error. The default error action is to stop. (This parameter defines the action for execution errors, not syntax errors. Some error conditions might override the continue value.) Specifies the password for the storage array. You must put quotation marks (" ") around the password. NOTE: Passwords are stored on each storage array in a management domain. If a password was not previously set, you do not need a password. The password can be any combination of alphanumeric characters with a maximum of 30 characters. (You can define a storage array password by using the set storageArray command.) Script Commands 179