Dell PowerVault MD3000i Command Line Interface Guide - Page 124
enclosure ID and slot ID. The RAID, Parameters
View all Dell PowerVault MD3000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Parameters Parameter physicalDiskCount raidLevel userLabel physicalDiskType capacity Description Number of unassigned physical disks to use in the disk group. NOTE: The physicalDiskCount parameter enables you to choose the number of physical disks to use in the disk group. You do not need to specify the physical disks by enclosure ID and slot ID. The RAID controller modules choose the specific physical disks to use for the disk group. RAID level of the disk group that contains the virtual disk. Valid values are 0, 1, or 5. Name to give to the new virtual disk. You must put quotation marks (" ") around the new virtual disk name. Specifies the type of physical disk to use in the virtual disk. You cannot mix physical disk types in the virtual disk. Valid physical disk types are SAS or SATA. The size of the virtual disk that you are adding to the storage array. Size is defined in units of bytes, kilobytes, megabytes, or gigabytes. NOTE: A space must be added between the last digit and the size (MB, GB, or KB) for values greater than 9. 124 Script Commands