Dell PowerVault MD3000i Command Line Interface Guide - Page 146
Download Storage Array Firmware/NVSRAM, or Never Attempted With Reason.
View all Dell PowerVault MD3000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
You can use this command to test the firmware on one physical disk before installing the firmware on all of the physical disks in a storage array. (Use the download storageArray physicalDiskFirmware command to download firmware on all of the physical disks in the storage array.) This command blocks all I/O activity until the download finishes or fails. The download returns one of the following statuses: Successful, Unsuccessful With Reason, or Never Attempted With Reason. Syntax download physicalDisk [enclosureID,slotID] firmware file="filename" Parameters Parameter physicalDisk filename Description Physical disk to which to download the firmware image. Specify the enclosure ID and slot ID for the physical disk. Enclosure ID values are 0 to 99. Slot ID values are 0 to 31. You must put brackets ([ ]) around the enclosure ID value and slot ID value. File path and file name of the file that contains the firmware image. You must put quotation marks (" ") around the firmware image file path and file name. Download Storage Array Firmware/NVSRAM This command downloads firmware and, optionally, NVSRAM values for the RAID controller module in the storage array. If you want to download only NVSRAM values, use the downLoad storageArray NVSRAM command. Syntax download storageArray firmware [, NVSRAM ] file= "filename" [, "NVSRAM-filename"] [downgrade=(TRUE | FALSE)] [activateNow=(TRUE | FALSE)] 146 Script Commands