Dell PowerVault MD3000i Command Line Interface Guide - Page 186
Set Storage Array iSNS Server IPv6 Address, ipv6-address
View all Dell PowerVault MD3000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
Parameters Parameter Description isnsIPV4Configuration Method The method that you want to use to define the iSNS server configuration. You can enter the IP address for the IPv4 iSNS servers by selecting static. For IPv4, you can choose to have a Dynamic Host Configuration Protocol (DHCP) server select the iSNS server IP address by entering dhcp. To enable DCHP, you must set the isnsIPV4Address IP address to 0.0.0.0. isnsIPV4Address The IP address that you want to use for the iSNS server. Use this parameter with the static argument for IPv4 configurations. If you choose to have a DHCP server set the IP address for an IPv4 IP iSNS server, you must set the isnsIPV4Address IP address to 0.0.0.0. NOTE: The DHCP server passes configuration parameters, such as network addresses, to IP nodes. DHCP enables a client to acquire all of the IP configuration parameters that it needs to operate. DHCP enables you to automatically allocate reusable network addresses. Example -c "set storageArray isnsIPV4ConfigurationMethod = static isnsIPV4Address = 192.168.0.1;" Set Storage Array iSNS Server IPv6 Address This command sets the address for an IPv6 Internet Storage Name Service (iSNS). Syntax set storageArray isnsIPV6Address=ipv6-address 186 Script Commands