Dell PowerVault MD3000i Command Line Interface Guide - Page 171
Set Enclosure Identification, Set Host, Service Tag, enclosureID
View all Dell PowerVault MD3000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
Parameter assetTag Description Asset tag name or number to give the new enclosure. Asset tags can be any combination of alphanumeric characters with a maximum length of ten characters. Alphabetical characters can be uppercase or lowercase. You can also use the underscore character (_) and the hyphen (-) character. You cannot use spaces in an asset tag name. You must put quotation marks (" ") around the asset tag name. Set Enclosure Identification This command sets the ID of an enclosure in a storage array. Syntax set enclosure ["Service Tag"] id=enclosureID Parameters Parameter enclosure id Description Service tag of the RAID enclosure or the expansion enclosure for which you are setting the enclosure ID. You must put quotation marks (" ") around the Service Tag. Specifies the value for the RAID enclosure or expansion enclosure ID. Valid values are 00 through 99. You do not need to put parentheses around the enclosure ID value. Set Host This command assigns a host to a host group or moves a host to a different host group. You can also create a new host group and assign the host to the new host group with this command. The actions performed by this command depend on whether the host has individual virtual disk-to-LUN mappings or does not have individual virtual disk-to-LUN mappings. Script Commands 171