Dell PowerVault MD3000i Command Line Interface Guide - Page 215
Start Enclosure Blink, Start iSCSI DHCP Refresh, enclosureID, iscsi-host-port
View all Dell PowerVault MD3000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
Parameters Parameter diskGroup Description Number of the disk group to defragment. You must put brackets ([ ]) around the disk group number. Start Enclosure Blink This command identifies an enclosure by turning on the indicator LED. (Use the stop enclosure blink command to turn off the indicator LED for the enclosure.) Syntax start enclosure [enclosureID] blink Parameters Parameter enclosure Description Identifies the enclosure to blink. Enclosure ID values are 0 to 99. You must put brackets ([ ]) around the enclosure ID value. Start iSCSI DHCP Refresh This command initiates a refresh of the DHCP parameters for the iSCSI interface. If the configuration method for the interface is not set to DHCP, the procedure returns an error. Syntax start storageArray [iscsi-host-port] dhcpRefresh Parameter Parameter iscsi-host-port Description The identifier of the port on the storage array on which you want to refresh the DHCP parameters. Enclose the iSCSI host port name in square brackets ([ ]). Script Commands 215