Dell PowerVault MD3000i Command Line Interface Guide - Page 169
Set Disk Group, IPV6ConfigurationMethod=auto enableIPV6=TRUE
View all Dell PowerVault MD3000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Examples -c "set controller [0] iscsiHostPort[0] IPV6LocalAddress= FE80:0000:0000:0000:0214:22FF:FEFF:EFA9 enableIPV6= TRUE;" -c "set controller [0] iscsiHostPort[0] IPV6ConfigurationMethod=auto enableIPV6=TRUE;" -c "set controller [0] availability=online;" -c "set controller [0] ethernetPort[1] IPV4Address=192.168.0.101;" -c "set controller [0] iscsiHostPort[1] IPV4SubnetMask=255.255.255.0 enableIPV4;" -c "set controller [0] iscsiHostPort[1] IPV4GatewayIP=192.168.0.1 enableIPV4;" Set Disk Group This command defines the properties for a disk group. Syntax set diskGroup [diskGroupNumber] addPhysicalDisks= (enclosureID0,slotID0 ... enclosureIDn,slotIDn) raidLevel=(0 | 1 | 5) owner=(0 | 1) availability=(online | offline) Parameters Parameter Description diskGroup Sequence number of the disk group for which to set properties. You must put brackets ([ ]) around the disk group number. addPhysicalDisks Identifies the physical disk by enclosure and slot location to include in the disk group. Enclosure ID values are 0 to 99. Slot ID values are 0 to 31. You must put parentheses around the enclosure ID values and the slot ID values. raidLevel RAID level for the disk group. Valid values are 0, 1, or 5. Script Commands 169