Dell PowerVault MD3000i Command Line Interface Guide - Page 174
Set Host Port, portLabel, hostName
View all Dell PowerVault MD3000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Parameters Parameter hostGroup userLabel Description Name of the host group to rename. You must put brackets ([ ]) around the host group name. If the host group name has special characters, you must also put quotation marks (" ") around the host group name. New name for the host group. You must put quotation marks (" ") around the host group name. NOTE: You can use any combination of alphanumeric characters, hyphens, and underscores for the names. Command names can have a maximum of 30 characters. If you exceed the maximum character limit, replace square brackets ([ ]) with angle brackets (< >) to overcome this limitation. Set Host Port This command changes the host type for an HBA host port. You can also change an HBA host port label with this command. Syntax set hostPort [portLabel] host="hostName" userLabel="newPortLabel" Parameters Parameter hostPort host userLabel Description The name of the HBA host port for which you want to change the host type, or for which you want to create a new name. Enclose the HBA host port name in square brackets ([ ]). If the HBA host port label has special characters, enclose the HBA host port label in double quotation marks (" "). The name of the host to which the HBA host port is connected. Enclose the host name in double quotation marks (" "). The new name that you want to give to the HBA host port. Enclose the new name of the HBA host port in double quotation marks (" "). 174 Script Commands