Dell PowerVault MD3000i Command Line Interface Guide - Page 217
Start Physical Disk Reconstruction, Start Storage Array Blink, Start Virtual Disk Initialization
View all Dell PowerVault MD3000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
Start Physical Disk Reconstruction This command starts reconstructing a physical disk. Syntax start physicalDisk [enclosureID,slotID] reconstruct Parameters Parameter physicalDisk Description Identifies the enclosure and slot where the physical disk resides. Enclosure ID values are 0 to 99. Slot ID values are 0 to 31. You must put brackets ([ ]) around the enclosure ID value and slot ID value. Start Storage Array Blink This command identifies a storage array by turning on the indicator LED for the storage array. (Use the stop storageArray blink command to turn off the indicator LED for the storage array.) Syntax start storageArray blink Parameters None. Example -c "start storageArray blink ;" Start Virtual Disk Initialization This command starts the formatting of a virtual disk in a storage array. NOTE: Initializing a virtual disk is a long-running operation that you cannot stop. Syntax start virtualDisk [virtualDiskName] initialize Script Commands 217