Dell PowerVault MD3000i Command Line Interface Guide - Page 216
Start Physical Disk Blink, enclosureID, slotID
View all Dell PowerVault MD3000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
NOTE: This operation ends the iSCSI connections for the portal and brings down the portal temporarily. Start Physical Disk Blink This command identifies a physical disk by turning on the indicator LED on the physical disk. (Use the stop physicalDisk blink command to turn off the indicator LED on the physical disk.) Syntax start physicalDisk [enclosureID,slotID] blink Parameters Parameter physicalDisk Description Identifies the enclosure and slot where the physical disk resides. Enclosure ID values are 0 to 99. Slot ID values are 0 to 31. You must put brackets ([ ]) around the enclosure ID value and slot ID value. Start Physical Disk Initialize This command starts physical disk initialization. NOTICE: As soon as you enter this command, all user data is destroyed. Syntax start physicalDisk [enclosureID,slotID] initialize Parameters Parameter physicalDisk Description Identifies the enclosure and slot where the physical disk resides. Enclosure ID values are 0 to 99. Slot ID values are 0 to 31. You must put brackets ([ ]) around the enclosure ID value and slot ID value. 216 Script Commands