Dell PowerVault MD3000i Command Line Interface Guide - Page 189
Set Virtual Disk, mediaScanEnabled=TRUE | FALSE
View all Dell PowerVault MD3000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
Syntax set iscsiTarget unnamedDiscoverySession = (TRUE | FALSE) Parameter Parameter unnamedDiscoverySession Description This parameter turns on or turns off unnamed discovery sessions. Set the parameter to TRUE to turn on an unnamed discovery sessions. Set the parameter to FALSE to turn off an unnamed discovery sessions. NOTE: Discovery is the process where initiators determine the targets that are available. Discovery occurs at power-on/initialization and also if the bus topology changes, for example, if an extra device is added. NOTE: An unnamed discovery session is a discovery session that is established without specifying a target ID in the login request. For unnamed discovery sessions, neither the target ID or the target portal group ID are available to the targets. Set Virtual Disk This command defines the properties for a virtual disk. You can use most of the parameters to define properties for one or more virtual disks, however, some of the parameters define properties for only one virtual disk at a time. The syntax definitions are separated to show which parameters apply to several virtual disks and which apply to only one virtual disk. The syntax for virtual disk mapping is listed separately. Syntax Applicable to One or More Virtual Disks set (allVirtualDisks | virtualDisk ["virtualDiskName"] | virtualDisks ["virtualDiskName1" ... "virtualDiskNamen"] |virtualDisk ) mediaScanEnabled=(TRUE | FALSE) mirrorCacheEnabled=(TRUE | FALSE) modificationPriority=(highest | high | medium | Script Commands 189