Dell S3845cdn Color Smart Multifunction Printer User Guide - Page 102
Original Size, Portrait, Landscape
View all Dell S3845cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
identify the top of the document. NOTE: • If this setting differs from the actual document orientation, the machine may not detect the top of the document correctly. Portrait Select this option when your document is a portrait page. For LEF loading, the machine regards the top edge as the head of pages. For SEF loading, the machine regards the left edge as the head of pages. Landscape Select this option when your document is a landscape page. For LEF loading, the machine regards the left edge as the head of pages. For SEF loading, the machine regards the top edge as the head of pages. Original Size This feature allows you to specify the scan size for a document. Auto Detect The following table shows the document sizes that can be detected automatically. Auto-detectable Document Size Document Feeder Legal size, Default size Document Glass Default size NOTE: • The default size for this feature can be switched between Letter size and A4 size. See "Paper Size Preference". Mixed Size Originals Enables the size detection of each page of documents. When this option is disabled, the printer detects only the first page's size and applies it to all the pages. NOTE: • The detectable width is fixed to 8.5 inches (215.9 mm). When the detected length is equal to or less than 315 mm, the document size is taken as Letter size. When the detected length is larger than 315 mm, the document size is taken as Legal size. Custom / Presets Enter the desired scan size when making copies at a size different from the original document size. You can specify a value in the range from 15 to 356 mm for the length (X), and a value in the range from 15 to 216 mm for the width (Y), in 1 mm increments. To help you specify values, use the scales attached on the upper and left edges of the document glass. NOTE: • When the document is loaded in the document feeder, the base point in the Y direction is the center of the edge. If you specify 100 mm, the scan length will be from 50 mm above to 50 mm below the center of the document. 102 | Scan To