Dell S3845cdn Color Smart Multifunction Printer User Guide - Page 38
Configuring the Optional Wireless Adapter, WPS-PBC
View all Dell S3845cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Configuring the Optional Wireless Adapter You can select a method to configure a wireless adapter from the following: WPS-PBC*1*3 WPS-PIN*2*3 Auto SSID Setup Manual SSID Setup Dell Printer Configuration Web Tool *1 WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and register devices required for wireless configuration, by pressing the button provided on your access point or wireless router. This setting is available only when the access point supports WPS. Before starting WPS-PBC, check where the WPS button (button name may vary) on the wireless LAN access point. *2 WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and register devices required for wireless configuration, by entering PIN assignments into the wireless LAN access point. This setting, performed through access point, is available only when the access points of your wireless router supports WPS. *3 For WPS operation on the wireless LAN access point, refer to the manual supplied with the wireless LAN access point. NOTE: • The optional wireless adapter must be installed on the printer. WPS-PBC You can start Push Button Configuration only from the control panel. 1 Press the button. 2 Tap DeviceJConnectivityJWi-Fi. 3 Tap Manual Setup. 4 Tap Wi-Fi Protected Setup (WPS)JPBCJOK. NOTE: • Start the WPS-PBC on the wireless LAN access point (Registrar) within 2 minutes. When the WPS operation is successful and the printer is rebooted, wireless LAN connection setting is completed. WPS-PIN The PIN code of WPS-PIN can only be configured from the control panel. 1 Press the button. 2 Tap DeviceJConnectivityJWi-Fi. 3 Tap Manual Setup. 4 Tap Wi-Fi Protected Setup (WPS)JPIN. 5 Write down the displayed 8-digit PIN code for the wireless LAN access point. 6 Tap OK. NOTE: • Enter the PIN code into the wireless LAN access point (Registrar) within 2 minutes. When the WPS operation is successful and the printer is rebooted, wireless LAN connection setting is completed. 38 | Connecting and Setting Up Your Printer