Dell S3845cdn Color Smart Multifunction Printer User Guide - Page 249
Change Destination, Starting the Scan Job, Scan to USB, Add
View all Dell S3845cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
2 Select USBJScan to USB. NOTE: • Data stored in a USB memory device may be lost or damaged in the following cases. Make sure to back up the data in the device before use. - When disconnecting/connecting the USB memory device by methods other than described in this guide - When receiving the effect of electrical noise or an electrical discharge - When a fault or failure occurs during operation - If the USB memory device receives mechanical damage • We assume no responsibility for any direct and indirect damages arising from or caused by such data loss. • Exit the Power Saver mode before inserting a USB memory device. Change Destination You can specify a file storage location in the USB memory device. 1 Select Change Destination. 2 Select a folder to save the data in. NOTE: • If a folder or file name exceeds 170 characters long, the folder or file name is not displayed. • Folder names which include characters that the machine does not support may not be correctly displayed. If you specify such folders for file storage locations, an error may occur. • The machine does not distinguish between upper and lower cases of folder and file names that are created in Windows environment and that consist of eight characters or less. The names for these folders and files are displayed in capital letters. • If a full path (a string of folder and file names in all directories) of the file created exceeds 257 characters long, an error may occur. 3 Select OK. Starting the Scan Job 1 Select the field with the default file name. NOTE: • You can skip steps 1 and 2, when you need not to change the file name from the default value. 2 Enter the file name for the scanned data using the keyboard on the touch screen. NOTE: • The default file name is "Dell Scan" with Date and Time. • The file extension is automatically appended to the entered name. You can change the file extension by selecting the File Format button on the Scan to USB screen. 3 Select any feature button to change the scan settings as necessary. NOTE: • See "Scan To". 4 Select Scan. NOTE: • If the document has been loaded in the document feeder, do not hold down the document while it is being conveyed. If you have more documents Select Add Page on the touch screen after the current document on the document glass Scanning | 249