Dell S3845cdn Color Smart Multifunction Printer User Guide - Page 77

Diagnostics Displays the diagnostics menu. Altitude Adjustment Specify the altitude of the location where the printer is installed. Color Calibration Corrects the consistency of printing colors over time, environment, and print media. Color Registration - Automatic See "Adjusting Color Registration". Color Registration - Manual See "Adjusting Color Registration". Image Position Adjust the image position. Scan Color Consistency Adjust the scan color consistency. Non-Dell Toner Cartridges Enable or disable the Non-Dell Toner mode. Fusing Unit Temperature Adjustment Adjust the temperature of the fusing unit. To lower the temperature, set negative values. To increase, set positive values. The default settings may not give the best output on all paper types. When the printed paper has curled, try to lower the temperature. When the toner does not fuse on the paper properly, try to increase the temperature. NOTE: • The print quality changes depending on the setting values you select for this item. Transfer Voltage Adjustment Adjust the transfer voltage. To lower the voltage, set negative values. To increase, set positive values. The default settings may not give the best output on all paper types. If you see mottles on the print output, try to increase the voltage. If you see white spots on the print output, try to decrease the voltage. NOTE: • The print quality changes depending on the setting values you select for this item. Hardware Displays the maintenance menu for hardware. Device | 77