Dell S3845cdn Color Smart Multifunction Printer User Guide - Page 429
Output Color, Black &, White, Grayscale, Color, Auto Detect, Black & White, Reduce/Enlarge
View all Dell S3845cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 429 highlights
Symptom Cause Remedy The image is not the The document glass or the desired size. document cover is dirty. Clean the document glass or the document cover. The document is a transparent Place a white sheet of paper on top of the type such as a transparency film. document. The document is misaligned. Load the document correctly. The document guides on the document feeder are not set in the correct positions. Load the document correctly, and align the document guides to the document. The document is a non-standard Specify the document size. size. The document is folded. Flatten the curl and load the document again. The image is not Output Color is set to Black & Set Output Color to Color or Auto Detect. copied or scanned in White or Grayscale. color. Black-and-white gradation is not reproduced properly. Black & White is selected for Set Output Color to Grayscale. Output Color. The copy is misaligned or skewed. The document is misaligned. Load the document correctly. The document guides on the document feeder are not set in the correct positions. Load the document correctly, and align the document guides to the document. The paper tray is not inserted correctly. Firmly push in the tray until it stops to set it properly. The paper guides in Tray 5 are Load the paper correctly, and align the paper not set in the correct positions. guides to the paper edges. The copy is slightly Paper is misaligned in the tray. Align the paper edges, and adjust them to the misaligned. tray's top corners to reload the paper. The copy has a stripe The document enlargement ratio Adjust the ratio to eliminate the stripes. pattern. is too large. The document The document is larger than the Adjust Reduce/Enlarge to copy the document edges are missing on printable area. smaller. the copy. The scanned image The resolution is too low. is coarse. Image is saved with high compression. Set the resolution higher. Select a lower compression ratio in Image Quality/File Size. Copy and Scan Problems | 429